日韩精品一区在线,久热久爱免费精品视频在线,日韩精品久久久久久久,国模少妇无码一区二区三区

NF A32-060-2001

鑄造產品.泵、閥門和配件用鑄鋼件和鎳合金鑄件(內部部件和防護殼體)

(Foundry products - Cast steel and nickel alloy castings for pumps, valves and fittings (enclosures and internal components).)

NF C52-121-1968

變壓器.變壓器油用電泵組

(TRANSFORMERS. ELECTRIC POMPS FOR TRANSFORMER OIL.)

NF C52-121M1-1974

變壓器.變壓器油用電泵組

(TRANSFORMERS. ELECTRIC POMPS FOR TRANSFORMER OIL.)

NF C52-121M2-1977

變壓器.變壓器油用電泵組

(TRANSFORMERS.ELECTRIC POMPS FOR TRANSFORMER OIL.)

NF C52-216-7-2002

電力變壓器和反應堆配件.第7部分: 變壓器油用電子泵

(Power transformer and reactor fittings - Part 7 : electric pumps for transformer oil.)

NF C55-409-2-2000

水輪機、蓄能泵和水泵水輪機氣蝕損壞的評定.第2部分:水斗式水輪機的評定

(Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines - Part 2 : evaluation in Pelton turbines.)

NF C55-420-1993

液壓機(渦輪、存儲泵和水泵-水輪機)的振動和脈動的現場測量指南

(Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storga pumps and pump-turbines).)

NF C55-493-2000

液壓渦輪機,儲存泵和泵渦輪.模型驗收試驗

(Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests.)

NF C57-310-1988

太陽能電能直接轉換.光伏特泵裝置.預見特性

(DIRECT TRANSFORMATION OF SOLAR ENERGY INTO ELECTRICAL ENERGY. PHOTOVOLTAIC PUMPING SYSTEM. PREDICTED CHARACTERISTICS.)

NF C57-335-2000

直接連接的光電(PV)泵裝置的額定值

(Rating of direct coupled photovoltaic (PV) pumping systems.)

NF C73-840-2001

家用及類似用途電器的安全.第2-40部分: 電動熱泵、空調器和去濕機的特殊要求

(Safety household and similar electrical appliances - Part 2-40 : particular requirements for electrical heat pumps, air conditioners and deshumidifiers.)

NF C73-841-1996

家用和類似用途電器的安全.第2部分:溫度不超過35℃的液體用電泵 的特殊要求

(Safety of household and similar electrical appliances. Part 2 :particular requirements for pumps for liquids having a temperature not exceeding 35 degrees celsius.)

NF C73-851-2000

家用和類似用途電器的安全.第2-51部分:加熱設備和配水設備的固定循環泵的特殊要求

(Safety of household and similar electrical appliances - Part 2-51 : particular requirements for stationary circulation pumps for heating and service water installations.)

NF C74-304-2003

醫用電氣設備.第2-24部分:輸液泵及其控制器的安全特殊要求

(Medical electrical equipment Part 2-24 : particular requirements for the safety of infusion pumps and controllers.)

NF C93-805-6-1-1998

光纖放大器. 基本規范.第6-1部分:泵漏參數的試驗方法.光信號分離器

(Optical fibre amplifiers. Basic specification. Part 6-1 : test methods for pump leakage parameters. Optical demultiplexer.)

NF E31-312-1988

油霧化燃燒器.帶旋轉軸和外部傳動泵.尺寸

(ATOMIZING OIL BURNERS. PUMPS WITH ROTATING SHAFT AND EXTERNAL DRIVE. DIMENSIONS. (EUROPEAN STANDARD EN 225).)

NF E35-404-1-2000

制冷系統和熱泵.安全和環境要求.第1部分:基本要求、定義、分類和選擇標準

(Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1 : basic requirements, definitions, classification and selection criteria.)

NF E35-404-2-2000

制冷系統和熱泵.安全和環境要求.第2部分:設計,結構,試驗,標記和存檔

(Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2 : design, construction, testing, marking and documentation.)

NF E35-404-3-2000

制冷系統和熱泵.安全和環境要求.第3部分:安裝地點和個人保護

(Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3 : installation site and personal protection.)

NF E35-404-4-2000

制冷系統和熱泵.安全和環境要求.第4部分:操作,維護,修理和恢復

(Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4 : operation, maintenance, repair and recovery.)

NF E35-407-2002

制冷系統和熱泵.限制壓力的安全開關裝置.要求和試驗

(Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests.)

NF E35-413-2001

冷卻系統和熱泵.減壓裝置及其相應管道.計算方法

(Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation.)

NF E35-415-1998

冷凍系統和熱泵.系統流程圖和管道及結構圖.流程圖和符號

(REFRIGERATING SYSTEMS AND HEAT PUMPS. SYSTEM FLOW DIAGRAMS AND PIPING AND INSTRUMENT DIAGRAMS. LAYOUT AND SYMBOLS. (EUROPEAN STANDARD EN 1861).)

NF E35-420-2002

制冷系統和熱泵.人員能力.

(Refrigerating systems and heat pumps - Competence of personnel.)

NF E35-451-1998

帶有電動壓縮機的熱泵和液體制冷包裝.制冷模式.定義,試驗和要求

(Liquid chilling packages and heat pumps with electrically driven compressors. Cooling mode. Definitions, testing and requirements.)

NF E35-600-2-2000

燃氣吸收和吸收式空調和/或凈輸入熱量不超過70KW的熱泵用具.第2部分:合理的能量使用

(Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Part 2 : rational use of energy.)

NF E36-104-1-1997

帶電驅動壓縮機的空調器和熱力泵.制冷.第1部分:術語、定義、名稱和牌號

(Air conditioners and heat pumps with electrically driven compressors. Cooling mode. Part 1 : terms, definitions and designations.)

NF E36-104-2-1997

帶電驅動壓縮機的空調器和熱力泵.制冷.第2部分:試驗和標記要求

(Air conditioners and heat pumps with electrically driven compressors. Cooling mode. Part 2 : testing and requirements for marking.)

NF E36-104-3-1997

帶電驅動壓縮機的空調器和熱力泵.制冷.第3部分:要求

(Air conditioners and heat pumps with electrically driven compressors. Cooling mode. Part 3 : requirements.)

NF E38-115-1-1997

帶電驅動壓縮機的空調器,液體冷卻設備和熱力泵.暖氣.第1部分:術語,定義和名稱,牌號

(Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors. Heating mode. Part 1 : terms, definitions and designations.)

NF E38-115-2-1997

帶電驅動壓縮機的空調器,液體冷卻設備和熱力泵.暖氣.第2部分:室內暖氣用設備標志的檢驗和要求

(Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors. Heating mode. Part 2 : testing and requirements for marking for space heating units.)

NF E38-115-3-1997

帶電驅動壓縮機的空調器,液體冷卻設備和熱力泵.暖氣.第3部分:工業用水加熱用設備標志的檢驗和要求

(Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors. Heating mode. Part 3 : testing and requirements for marking for sanitary hot water units.)

NF E38-115-4-1997

帶電驅動壓縮機的空調器,液體冷卻設備和熱力泵.暖氣.第4部分:工業用水加熱及室內暖氣用設備的要求

(Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors. Heating mode. Part 4 : requirements for space heating and sanitary hot water units.)

NF E44-003-2000

液體泵.泵和設施的一般術語.定義,數量,字母符號和元件

(Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units.)

NF E44-051-2001

液體泵.安全要求.靜液壓試驗過程

(Liquid pumps - Safety requirements - Procedure for hydrostatic testing.)

NF E44-052-1986

泵.標記

(PUMPS. MARKING.)

NF E44-090-1998

液壓泵和液壓泵組件.一般安全要求

(Pumps and pump units for liquids. Common safety requirements.)

NF E44-125-1995

側槽泵.PN40.公稱負荷值.主要尺寸.命名系統

(SIDE CHANEL PUMPS PN 40. NOMINAL DUTY POINT, MAIN DIMENSIONS, DESIGNATION SYSTEM. (EUROPEAN STANDARD EN 734).)

NF E44-145-1988

轉子動力泵.法蘭盤受力和力矩.臥軸離心泵和混流量

(ROTODYNAMIC PUMPS. FORCES AND MOMENTS ON FLANGES. HORIZONTAL SHAFT CENTRIFUGAL AND MIXED FLOW PUMPS.)

NF E44-146-1988

旋轉泵.法蘭力和力矩.垂直軸離心泵.混流泵和軸流泵

(ROTODYNAMIC PUMPS. FORCES AND MOMENTS ON FLANGES. VERTICAL SHAFT CENTRIFUGAL,MIXED FLOW AND AXIAL PUMPS.)

NF E44-151-2002

離心泵的技術規范.2類

(Technical specifications for centrifugal pumps - Class II.)

NF E44-152-1998

離心泵的技術規范.1類

(TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS. CLASS 1. (EUROPEAN STANDARD EN ISO 9905).)

NF E44-154-1998

離心泵機械規范.三級

(TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS. CLASS III. (EUROPEAN STANDARD EN ISO 9908).)

NF E44-160-2003

無密封旋轉動力泵.II級.規范

(Seal-less rotodynamic pumps - Class II - Specification.)

NF E44-165-1990

工業泵.離心泵、混流泵和軸流泵.允許的機械振動級

(Industrial pumps. Centrifugal, mixed flow and axial pumps. Allowable level for mechanical vibrations.)

NF E44-190-1975

泵.裝配和安裝規范

(PUMPS-INSTRUCTIONS FOR MOUNTING AND INSTALLATION.)

NF E44-201-1984

泵.收斂和輻射連接規則

(PUMPS. RECOMMENDATIONS FOR CONNECTING BY CONVERGENT AND DIVERGENT SECTIONS.)

NF E44-221-1976

泵.連接器安裝時軸端的距離

(PUMPS. SHAFT END SPACING FOR COUPLING MOUNTING.)

NF E44-290-1975

泵.帶或不帶插件的連接器.用途和安裝

(PUMPS-COUPLINGS WITH OR WITHOUT SPACING PART-PURPOSE AND MOUNTING.)

NF E44-301-1984

泵.切削液.規范

(PUMPS FOR CUTTING OILS. SPECIFICATIONS.)

NF E44-351-1987

流量測定泵.潔凈水補充處理電能計量泵.試驗方法

(DISPLACEMENT PUMPS. ELECTRICALLY DRIVEN PROPORTIONING PUMPS FOR WASTE WATER TREATMENT. TESTS.)

NF E44-361-1999

旋轉變容泵.技術要求

(ROTARY POSITIVE DISPLACEMENT PUMPS. TECHNICAL REQUIREMENTS. (EUROPEAN STANDARD EN ISO 14847).)

NF E44-362-2003

往復式容積泵和泵裝置.技術要求

(Reciprocating positive displacement pumps and pumps units - Technical requirements.)

NF E44-401-2000

旋轉動力泵.液壓性能驗收試驗.等級1和2

(Rotodynamic pumps - Hydraulic perforamnce acceptance tests - Grades and 2.)

NF E44-420-2000

液體泵和泵部件.噪音試驗規程.2級或3級精度

(Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy.)

NF E48-101-1984

液壓傳動.泵，發動機和變速器.量值的定義和用作符號的字母

(Hydraulic fluid power. Pumps, motors and integral transmissions. Parameter definitions and letter symbols.)

NF E48-353-2002

液力傳動.活塞泵和電動機的安裝法蘭盤和軸端用尺寸及識別碼.第2部分:米制系列

(Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2 : metric series.)

NF E48-354-1989

液壓傳動.容積泵和容積汽缸功率的測定

(HYDRAULIC FLUID POWER. POSITIVE DISPLACEMENT PUMPS AND MOTORS.)

NF E48-384-1992

液壓動力.固定式活塞泵.由于A(yíng)C級細粒粉塵污染引起的流動降緩.試驗方法

(HYDRAULIC FLUID POWER. FIXED DISPLACEMENT PUMPS. FLOW DEGRADATION DUE TO CLASSIFIED AC FINE TEST DUST CONTAMINANT. TEST METHOD.)

NF E48-386-1992

氣壓液力傳動.氣載噪聲級測定試驗規程.第1部分:泵

(HYDRAULIC FLUID POWER. TEST CODE FOR DETERMINATION OF AIRBONE NOISE LEVELS. PART 1 : PUMPS.)

NF E48-388-1992

氣壓液力傳動.氣載噪聲級測定試驗規程.第3部分:泵.平行六面傳聲器陣列方法

(HYDRAULIC FLUID POWER. TEST CODE FOR DETERMINATION OF AIRBONE NOISE LEVELS. PART 3 : PUMPS. METHOD USING A PARALLELEPIPED MICROPHONE ARRAY.)

NF E48-390-1997

液壓傳動.在系統和元件中對產生壓力波動等級的測定.第1部分:泵精確度法

(HYDRAULIC FLUID POWER. DETERMINATION OF PRESSURE RIPPLE LEVELS GENERATED IN SYSTEMS AND COMPONENTS. PART 1 : PRECISION METHOD FOR PUMP.)

NF E48-391-2000

液壓動力.系統和元件內產生的壓力波動水平的測定.泵用簡化方法

(Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Simplified method for pumps.)

NF E51-290-1996

壓縮機和真空泵.安全要求.第1部分:壓縮機

(Compressors and vacuum pumps. Safety requirements. Part 1 : compressors.)

NF E51-291-1996

壓縮機和真空泵.安全要求.第2部分:真空泵

(Compressors and vacuum pumps. Safety requirements. Part 2 : vacuum pumps.)

NF E86-514-2000

冷凍車輛.冷凍服務用泵

(Cryogenic vessels - Pumps for cryogenic service.)

NF J95-024-1993

游艇.電動艙底泵

(Small craft. Electrically operated bilge-pumps.)

NF J95-024/A1-2001

小艇.電氣操作底艙泵

(Small craft - Electrically operated bilge-pumps.)

NF J95-062-2003

小艇.艙底泵吸系統

(Small craft - Bilge-pumping systems.)

NF L45-101-1987

航空和航天.液力、壓力補償或變量輸送泵.一般要求

(Aerospace. Hydraulic, pressure compensated, variable delivery pumps. General requirements.)

NF L48-130-1948

飛機的流體裝置.使用的互換性.燃料計量器、燃料泵等的接管座

(AIRCRAFT FLUID INSTALLATIONS. IN-SERVICE INTERCHANGEABILITY. FLANGES FOR LEVEL INDICATORS,FUEL PUMPS,ETC... (RECH.).)

NF L48-135-1972

燃料計量器、燃料泵等接頭的使用互換性（ISO 螺紋剖面和公差）

(IN-SERVICE INTERCHANGEABILITY. FLANGES FOR LEVEL INDICATORS,FUEL PUMPS,ETC... (ISO THREAD PROFILE AND TOLERANCES).)

NF L86-110-1958

供油泵.固定和驅動

(FEED PUMPS. MOUNTING AND DRIVE.)

NF M87-237-1-2002

石油和天然氣工業用下降孔設備.人造升降機用行進腔體泵系統.第1部分:泵

(Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1 : pumps.)

NF P16-150-6-1998

建筑物外部排水和污水系統.第6部分:泵設備

(Drain and sewer systems outside buildings. Part 6 : pumping installations.)

NF P52-101-2000

泵.旋轉動力泵.加熱裝置和家用熱水裝置用電效應不足200W的循環泵.要求、試驗和標記

(Pumps - Rotodynamic pumps - Circulation pumps having an electrical effect not exceeding 200 W for heating installations and domestic hot water installations - Requirements, testing, marking.)

NF P94-130-1992

土壤.調查與試驗.泵送試驗

(SOILS : INVESTIGATION AND TESTING. PUMPING TEST.)

NF P98-723-1-1994

道路施工和維護設備.瀝青粘合劑泵.第1部分:試驗臺和方法

(ROAD CONSTRUCTION AND MAINTENANCE EQUIPMENT. BITUMINOUS BINDER PUMPES. PART 1 : TEST BENCH AND METHOD.)

NF R13-404-1990

道路車輛.燃油泵的電連接件

(Road vehicles. Fuel pump electric connections.)

NF R16-306-1953

噴射泵連接管

(COUPLINGS FOR INJECTION PUMPS.)

NF R16-315-1982

道路車輛.柴油泵試驗.第1部分：動力條件

(Fuel injection pump testing. Part 1 : dynamic conditions.)

NF R16-317-1987

道路車輛.燃油噴射泵.試驗用高壓管

(Road vehicles. Fuel injection pumps. High-pressure pipes for testing.)

NF R16-321-1985

道路車輛.平面底座直線固定噴油泵

(ROAD VEHICLES. BASE MOUNTED IN-LINE FUEL INJECTION PUMPS.)

NF R16-322-1985

道路車輛.噴油泵試驗.靜態條件

(ROAD VEHICLES. FUEL INJECTION PUMP TESTING. STATIC CONDITIONS.)

NF R16-327-1986

道路車輛.噴油泵用安裝法蘭.尺寸

(ROAD VEHICLES. END-MOUNTING FLANGES FOR FUEL INJECTION PUMPS. DIMENSIONS.)

NF R16-328-1994

柴油發動機.燃油注入泵.軸端和襯套楔梢

(Diesel engines. Fuel injection pumps. Tapers for shaft ends and hubs.)

NF R16-329-2000

噴油裝置.詞匯.第1部分:噴油泵

(Fuel injection equipment - Vocabulary - Part 1 : fuel injection pumps.)

NF R16-329/A1-2001

燃料注入設備.詞匯.第1部分:燃料注入泵

(Fuel injection equipment - Vocabulary - Part 1 : fuel injection pump.)

NF R16-330-2003

道路車輛.弧形底安裝直列式噴油泵.安裝尺寸

(Diesel engines - Cradle-mounted in-line fuel injection pumps - Mounting dimensions.)

NF R16-333-1989

道路車輛.燃油噴射泵試驗.第3部分:產品應用和試驗

(ROAD VEHICLES. FUEL INJECTION PUMP TESTING. PART 3 : APPLICATION AND TEST PROCEDURES.)

NF S61-116-2003

消防水龍帶.泵和水車用半硬度輸水軟管和軟管組合件

(Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles.)

NF S63-125-1-2002

消防泵.帶起動注油器的消防離心泵.第1部分:分類.總則和安全要求

(Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1 : classification - General and safety requirements.)

NF S63-125-2-2002

消防泵.帶起動注油器的消防離心泵.第2部分:總則和安全要求的檢定

(Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2 : verification of general and safety requirements.)

NF S93-001-2-1997

一次性使用無菌皮下注射器.第1部分:帶動力注射泵的注射器

(STERILE HYPODERMIC SYRINGES FOR SINGLE USE. PART 2 : SYRINGES FOR USE WITH POWER-DRIVEN SYRINGE PUMPS. (EUROPEAN STANDARD EN ISO 7886-2).)

NF T71-200-1999

用碳氫化合物防止水污染的設備.泵系統.數據頁.標準布局.

(EQUIPMENT FOR PROTECTION AGAINST WATER POLLUTION BY HYDROCARBONS. PUMPING SYSTEMS. DATA SHEET. STANDARD LAY-OUT.)

NF T81-010-1976

液態化學產品的運輸和裝卸.內河航行罐船.產品的液壓泵輸送.安全裝置

(TRANSPORT AND HANDLING OF LIQUID CHEMICAL PRODUCTS. TANKERS FOR INLAND NAVIGATION. PUMP TRANSFER OF PRODUCTS. SAFETY DEVICE.)

NF U61-060-2003

液泵.安全要求.農業食品生產設備.保證使用衛生的設計原則

(Liquid pumps - Safety requirements - Agrifoodstuffs equipment - Design rules to ensure hygiene in use.)

NF X10-501-1976

真空技術.詞匯.真空泵

(Vacuum technology. Vocabulary. Vacuum pumps.)

NF X10-507-1975

真空技術.噴霧離子泵.功能特性的測定

(VACUUM TECHNOLOGY - SPUTTER-ION PUMPS - MEASUREMENT OF PERFORMANCE CHARACTERISTICS)

NF X10-511-1971

真空技術.真空體積初壓泵.體積流量的測定

(Vacuum technology-positive-displacement vacuum pumps-measurement ofthe volume rate of flow (pumping speed).)

NF X10-519-1975

真空技術.渦輪分子泵.功能特性的測定

(VACUUM TECHNOLOGY - METHODS OF MEASUREMENT OF THE PERFORMANCE CHARACTERISTICS OF TURBO-MOLECULAR PUMPS)

NF X20-204-1974

氣體分析.用配量活塞泵對氣體混合物的動力制備進行校準的方法

(GAS ANALYSIS. METHOD FOR THE DYNAMIC PREPARATION OF GAS MIXTURES FOR CALIBRATION BY PROPORTIONING PISTON PUMPS.)

NF X42-130-1998

生物工程.泵的性能規范(歐洲標準EN 12462)

(Biotechnology. Performance criteria for pumps.)

NF X43-245-1999

工作場所空氣.體積流速大于51/min的化學試劑取樣用泵.要求和試驗方法

(Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min - Requirements and test methods.)

NF X43-282-1997

工作場所空氣.化學試劑專用抽樣泵.要求和試驗方法(歐洲標準EN 1232)

(WORKPLACE ATMOSPHERES. PUMPS FOR PERSONAL SAMPLING OF CHEMICAL AGENTS. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 1232).)

NF X50-001-5-4-1998

動力站設備的征購指南.第5-4部分:渦輪機.液壓渦輪機.儲存泵和泵渦輪機

(Guide for procurement of power station equipment. Part 5-4 : turbines. Hydraulic turbines, storage pumps and pump-turbines.)

NF X50-001-6-4-2000

動力站設備的征購指南.第6部分:渦輪附件.第4節:泵

(Guide for the procurement of power station equipement - Part 6 : turbine auxiliaries - Section 4 : pumps.)